Shenzhen ERI Electronics Limited
INNOVATION INTEGRITY OPENNESS WIN-WIN
Add to Cart
H.264 Decode NTSC Synopsis Receptor Dvbc Stb
Description OF Receptor Dvbc Stb
DVB-C uses Quadrature Amplitude Modulation (QAM) for the modulation of the data on
the carrier. Normally 64-QAM is used but lower level modulation schemes, such as 16-QAM
and 32-QAM, and higher level modulation schemes such as 128-QAM and 256-QAM can
also be used. The data capacity increase with higher level modulation schemes but the data
will be less robust against noise and interference.
Receptor Dvbc Stb Specification:
- PAL: 576i/576p/720p/1080i/1080P
- NTSC: 480i/480p/720p/1080i/1080P
- CAS Supported
- USB WIFI Dongle both Internet and Interactive Function
- USB PVR and Time-shift
Application With Receptor Dvbc Stb:
- Cable TV Operator
- Pay TV Operator
- Internet Service Provider
- Content Provider
Features:
| Flash | 8MB |
| DDR3 | 128MB |
| Input Signal Range | 38-100dBuV |
| Input Impedance | 75Ω |
| Standard | DVB-C (ITU-T J.83A/C) |
| Demodulation | 16,32,64,128,256QAM |
Advantages:
1. Convenient Location
2. Comprehensive Marketing Strategies
3. Strong Industry Alliances
4. Positive Reputation in the Market
5. Comprehensive Product Warranty
6. Proven Track Record of Successful Products
7. Genuine Customer Engagement
FAQ:
1.Is a set-top box compatible with a digital antenna?
A set-top box can be compatible with a digital antenna, but it depends on the specific set-top
box and the digital antenna you are using.Many set-top boxes, such as those for cable or satellite TV,
are designed to work with a specific type of antenna or signal. In this case, you may need to check
with the manufacturer of your set-top box to see if it is compatible with a digital antenna.
However, if you have a set-top box that is designed to receive over-the-air broadcasts, it should be
compatible with a digital antenna. In fact, using a digital antenna with a set-top box can provide you
with access to local channels and programming that may not be available through your cable or satellite
provider.To use a digital antenna with a set-top box, you will need to connect the antenna to the input on
the set-top box using a coaxial cable. Then, you can use the set-top box to scan for available channels
and watch them on your TV.